Wednesday, November 23, 2016

Do you remember the radial engine (755 cu in) C10 from SEMA 2014? Well, I just saw the photo of what a back fire looks like... not pretty

Dr T Midgley... chemist

Thomas Midgley was a renowned chemist and inventor who held over 100 patents in his lifetime, but he’s most notorious for two chemicals which wreaked untold havoc on the environment: leaded gasoline and Freon. If that wasn't enough to pollute the world, he also pioneered CFCs, which led to all the plastics that float in the oceans, and styrofoam pellets that don't ever break down. http://knowledgenuts.com/2013/10/03/the-worst-inventor-in-history/


Doctor Thomas Midgley Jr., an American mechanical engineer and chemist. He was a key figure in a team of chemists, led by Charles F. Kettering, that developed the tetraethyllead (TEL) additive to gasoline as well as some of the first chlorofluorocarbons (CFCs).  https://en.wikipedia.org/wiki/Thomas_Midgley_Jr.


Decades later, Midgley's two foremost inventions, leaded gasoline and chlorofluorocarbons, would be globally banned after wreaking havoc on both public health and the world environment.  http://www.realclearscience.com/blog/2013/10/the-well-meaning-scientist-who-destroyed-the-planet.html


In the late 1910's, working as a chemist at Dayton Research Laboratories, a subsidiary of General Motors, Midgley tackled the issue of "engine knocking," a problem that plagued old automotives. Fuel would ignite too rapidly, and outside the areas of normal combustion in the engine. This would prompt a temporary loss of power, marked by a disconcerting "pinging" sound.

Midgley discovered that adding a compound called tetraethyllead to fuel could greatly boost its octane rating, an indication of how much compression fuel can withstand before detonating. The additive effectively eliminated the problem of engine knocking, an accomplishment that garnered him the prestigious Nichols Medal from the American Chemical Society. But it simultaneously introduced a new problem: lead.

In the early 1930's, Midgley sought to create a new, innocuous refrigerant for air conditioners and refrigerators. At the time, those machines used toxic and flammable compounds like ammonia, chloromethane, propane, and sulfur dioxide. Consulting his trusty periodic table, Midgley identified a new compound, dichlorodifluoromethane -- more commonly known as freon -- in just a matter of days. It caught on in a similarly hasty fashion. Apparently safe, non-flammable, and non-toxic, the gas appeared in almost all refrigerators within only a few years. It also found its way into aerosol deodorants and pretty much any sort of consumer spray device.

Tuesday, November 22, 2016

1955 VW Panelvan abandoned deep in a French Alps valley 40 years ago when the owner of the land got it stuck between two tree and gave up on it... It was pulled it out of the forest in Sept 2016 by fixing it on site and driving it down the mountain (thanks Mario!)

a cool thing happened over the weekend... Ken Block had a toy drive at the Hoonigan Donut Garage (in Long beach)

See Jane Go, the Uber for women by women.


https://seejanego.co/ 
See Jane Go offers a women-driving-women trusted alternative to traditional ride hail. (Because we think getting into cars with strange men should be reserved only for online dating.)

See Jane Go’s CEO Kimberly Toonen says that women currently make up about 25 percent of drivers of traditional ride shares such as Uber and Lyft; I’ve been their passenger myself on many occasions. Some have told me they feel anywhere from mildly harassed to downright threatened by some of their male passengers.

From its launch in the OC (between Los Angeles and San Diego), Toonen says the company has “aggressive plans to expand to cities across the country.”

If you’re familiar with Uber or Lyft, you’ll understand the how See Jane Go works. Drivers and passengers register on the website or via the See Jane Go smartphone app. After a certification and training process, drivers are allowed to pick up passengers, who hail and pay through the app.

Beyond providing income comparable to Uber and Lyft (plus tips), See Jane Go sees itself as providing opportunities for drivers to build their own business. Mentors, called “Super Janes,” get company stock for helping to bring on board new drivers (who are called “Baby Janes”).

http://www.forbes.com/sites/andrewbender/2016/09/13/see-jane-go-new-ride-share-service-exclusively-for-women-aims-to-ease-passengers-fears/#4cf5485106ab

I've saved a life before... but I've never been emailed to be told that I prevented someone from committing murder. Until today.

MAN-O-MAN-O-MAN! You are a life saver!*

Saturday I changed out the cooling fan on the Kia Rio, then tackled replacing the high pressure power steering hose. Had everything disconnected but one last flare nut - that sucker just would not budge. Well, OK - I did not have the proper tools. I was using SAE wrenches where I should have been using metric flare nut wrenches. My metric set went up to 16mm - not high enough. I even broke an odd old wrench I had in my (modest) antique tool collection. Seriously, what the heck is this thing?

Googling...googling...ah, crap. It's a Coal Stove Burner Plate LID LIFTER!! It's CAST IRON!! No match for the Mighty Flare Nut Grip-O-Death. (I'm such an idiot.)

Anyway, I decided to put everything back together and go buy the proper tools. Got a 17mm flare nut wrench, but wouldn't you know it - no one in Las Vegas carries a 21mm flare nut wrench. Got a 21mm combination wrench and figured to make do. So today (Monday) I crawled back under the stupid POS and tried again. Accessibility is 8.5 on a scale where 10 means pulling the engine. Damn thing still would not budge.

I did not have any penetrating oil - but wait - what was that video I watched on good old Jesse's site just this very morning? The candle trick for getting off stuck lugs nuts!

So I trudged into the house, scrounged up a candle and grabbed a BBQ lighter (for the extra reach - did I mention that accessibility was an 8.5?). I balanced the candle on top of the flare nut and crawled under the car once more. Fired up the lighter and proceeded to heat up the nut from the bottom. I swear I could see the wax being sucked in. I quickly wiped off the parts and tried again. POP! Off it came easy as you please.

So, yeah...a) it works, and b) YOU THE MAN!

Then I sent my apprentice under the car to put the new hose on.


* I don't know whose life you saved, but SOMEONE was going to die if I had to take that POS to a mechanic to break free one damn nut.

Monday, November 21, 2016

check out the vinyl wrap on the BMW that Darryl photographed in Australia!





Thanks Darryl!

I don't think I've ever seen shadetree mechanic work like this before... this is a new kind of crude but effective innovative way to get a dead car running

how Hot Wheels are made

Dan Gurney's career launch was in a Corvette at Riverside, but here is some real crazy "Rest of the Story" info


This is the Corvette that belonged to Cal Bailey. A colorful person known as "Mr. Corvette" back in the day. He got his start racing by buying a 300 SL from Lance Reventlow

 In 1957 and 58, Bailey entered every Southern California Cal Club event from Palm Springs to Pomona as well as a few Northern California SCCA events. An erratic driver, he was not very successful.

He let Dan Gurney drive it at the opening race at Riverside Sept. 3-4,1957. Gurney won class that day and launched his career. It was Dan's only ride in a Corvette.

Then Bailey lost his marbles in 1966, and tried to kidnap the son of tire magnate Harvey Firestone.

Fire­stone was the third son of founder Harvey S. Firestone, and was a director of the global company and president of its California subsidiary in January 1966.

He lived in a luxurious home among Hollywood stars in Beverly Hills, and neighbors included Jimmy Stewart, Walter Matthau, and Randolph Scott. He was part owner of the California Angels and Los Angeles Rams. He was chairman of the University of Southern California board of trustees, national executive of Boy Scouts of America, and director of the Salvation Army.

Calvin Bailey went to the house with a pistol, a halloween mask, and a roll of tape to kidnap the 58 year old, and hold him for ransom. A cop answered the door and unloaded two shells of 12 gauge into him.

Bailey had already served 12 years in prison for robbery in the 40s and 50s in two foreign countries.

http://registryofcorvetteracecars.com/ee/index.php/site/view_cars/187
http://www.ohio.com/news/top-stories/local-history-kidnappers-plotted-to-abduct-firestone-heir-in-1966-1.458862
The Shop Magazine, National Business Media, Dec 2016 issue, page 31
http://www.joescalzowriter.com/PDF'S/Mr.%20Corvette.pdf

with help from friends and teammates, the Udall Honda takes another win in Baja, the 26th overall. That's remarkable, is any other motorcycle maker in competition in the Score Baja 1000?

What originally was planned as a solo ride in the Pro Moto Unlimited class, went to a two-rider effort on Monday, ended up with a five-team effort to help the injured rider of record Colton Udall,  finish the 2016 SCORE World Desert Championship undefeated with four straight victories.

With a whole lot of help from his friends after he was injured while pre-running on Tuesday night, taking the overall and unlimited class win for the fourth time in the last five years in this race was the Ox Motorsports team led by Colton Udall, Yucca Valley, Calif.

Suffering a severely broken left collar bone while pre-running near Borrego Tuesday evening, Udall quickly adjusted his rider list for his 1x Honda CRF450X, moving one rider from his Ox Motorsports 3x motorcycle and quickly recruited two additional riders to pick up the slack for his 1x team.

Regular teammate Mark Samuels, Yucca Valley, Calif., added additional miles to his racing sections, Australia’s Daymon Stokie was moved from the 3x team to the 1x and Udall recruited two addition riders who weren’t planning on racing this year in Justin Jones, Murrieta, Calif. and David Kamo, Boise, Idaho.

SCORE rules call for a rider of record to either start or finish a race, Udall wanted to win the race and the season point championship so he returned to Ensenada after surgery in San Diego to start the race and ride to the first turn some 100 yards from the start to fulfill that requirement.

In splitting up the race, Udall gave the motorcycle to Kamo who rode to race mile 90. Jones took over at that point, went to race mile 300 where Samuels got on for the first time and rode to race mile 520. Stokie then took it to race mile 780 where Samuels got back on for the final victory ride to the finish.

While Udall has now earned four overall race wins in the SCORE Baja 1000, Samuels and Kamo have won three each and this was Jones’ second straight.

“They didn't need me. When I was pre-running down in Borrego I made a bad decision and had to pass a guy in the dust. I took myself where I shouldn't have gone and ended up over the handlebars and stuck my shoulder into the ground and it broke. Fortunately I had people like Robby Gordon pulling me out of the desert and helping me out.

“I crashed on Tuesday night, had surgery on Wednesday afternoon and I was back down here on Thursday. About three and a half hours after I crashed we were already thinking about what our strategy was going to be for the race. We moved Daymon Stokie up from the 3x bike to the 1x bike and fortunately David Kamo was down here and came out of retirement. He is a three-time SCORE Baja 1000 champion and we earned those championships together. He raced about 90 miles and it took some of the work away from Mark and we got it done. We moved some things around and our team is solid. The way I helped on race day was by making sure every I was dotted and every T crossed.”

an old hot rod buried in a garage in El Paso, Texas in 1971, turns out to be one that Von Dutch striped in 1969... it was stuck in that garage until 2011 (thanks Brad!)


Michael Lightbourn, who uncovered Big Daddy Ed Roth’s long lost Orbitron in Juarez back in 2008ish, was instrumental in uncovering the Von Dutch ’23 T-bucket.

It was built in early 1969, with an L88 427, Crower and Hilborn induction, and a Ford 9"




He even got Von Dutch to make him a car show sign for it....



Full story and gallery at http://www.hotrod.com/articles/found-1923-t-bucket-striped-von-dutch/

Rod Hall, has competed in every Baja 1000, (the only racer who has) he's won 24 class wins, and won it overall once. Next year he'll compete again, and this year, he won his class again. Incredible!

 Rod Hall turns 79 on Nov. 22, won Stock Full in the Rod Hall Racing Hummer H1 Alpha.

Helping Hall, of Reno, Nev. reach another milestone in his illustrious career were his son Chad Hall, Reno, Nev., who now has 10 class wins, motorsports executive Frank DeAngelo, Greenville, S.C. and Shelby Hall, Rod’s granddaughter. Hall was diagnosed last December with Parkinson’s disease but has confirmed that he will go for his 25th class win in next November’s epic 50th SCORE Baja 1000 which will start in Ensenada and finish in La Paz.

it occurred to me... the best door handles for a car related business with double doors is

the clutch and brake pedal on the door that swings out (on the left typically (in the USA))
a gas pedal on the door that swings in (typically on the right)

If this has already been done, I'd not be surprised at all. In the past decade I've seen several companies put cool and relevant door handles on the business.

REI had a mountain climbers ice pick for a door handle, Hard Rock Cafe has a small brass guitar

wow, this looks incredible (someone give an Oscar to the film production and editting crew!)

the candle trick for getting off stuck lugs nuts. But really, don't you think you'd just go get some penetrating oil?



As always, skip the first minute. Thanks Mike! http://www.liveleak.com/view?i=ba2_1475277076

started last, finished first, and ties the record for Nascar championships with 7. Compliments to Jimmie Johnson



Why did he start in last place? I suspect Nascar was pressured to prevent him from getting his 7th championship. Only Richard Petty and Dale Earnhardt

What can't be denied is that inspectors ignored his car until the last minute, then "suddenly" have an issue with his A pillars.  http://www.nascar.com/en_us/news-media/articles/2016/11/20/jimmie-johnson-starting-from-rear-chase-for-nascar-sprint-cup-miami.html



That was instantly corrected and made fine and dandy, but put him in last. Seems to stink like 8 week old fish guts to me. Just what about the A pillar was noticeably "modified" isn't going to be said. It was all it took to fake a reason for a reinspect to pull him from 14th starting position to dead last though.

http://www.nascar.com/en_us/news-media/articles/2016/11/20/jimmie-johnson-wins-seventh-sprint-cup-series-championship-homestead-miami.html

http://www.latimes.com/sports/more/la-sp-nascar-jimmie-johnson-homestead-20161120-story.html

I'm in love... with this tow truck. Someone really oughta tell models to get off the cars and out of the photographers way so we can admire the vehicle.


A Ford C-600 from Kingman Arizona, 1958... that is a cool looking COE wrecker right there 

ads from 1958 for Gabriel shocks and the VW Panel Delivery

 

just ugly. Anyone seen an old 50's car with these JC Whitney headlight mods?


Steve went looking around, and the cars he found look fine... so, it's hard to believe they went out advertising with this dorky looking 57 Chev




where were these when I worked in a machine shop?


I dig the instant pinch and read the gauge system, instead of the slide micrometer, even the digital ones. 

Sunday, November 20, 2016

See this great looking Mustang? There is a cool story here: Project Sarge, from the same group (Rebuilding Generations) that last year worked up a 71 Duster. They get the kids to work on cars with parents and grandparents. Coolest thing I've learned about in the car enthusiast world, multi-generation car hot rodding



Their Duster was posted last year http://justacarguy.blogspot.com/2015/10/old-guys-connecting-with-young-guys.html but I didn't know they do this every year!

One of the guys on their team happens to be the cool guy who makes the Optima press and participant badges out of carbon fiber.  Why isn't anyone in the photos wearing those badges?

Rebuilding Generations started in 2013, it's purpose is to get the great grandparents, and grandparents, and parents, plus the kids, all working together. It's complete learning for the kids of course, they are brought in with little or no knowledge of cars, tools, or mechanics... and no one is better to teach them than the old guys that have time, and care enough to share their experience and expertise.

I seriously dig this whole thing. Not many people are looking to mentor kids, and pass along all the stuff they know, and teach some kids who might not have the privileged life of kind old guys and garages to hang out in.

If you ever get the chance, thank Kevin Keep. He got the ball rolling, started a 501c3, and gathered mentors and kids to work on mid 60s to early 70s cars.

They are located in Idaho, and that seems to be near Charlie Sutton's Color Studio. You probably recognize the name, Charlie was a paint and body supervisor at Boyd's, and on the tv show 10-12 years ago, American Hot Rod. Now he wins Ridler Awards. Well, one of the paint and body guys at Charlie's business is one of the mentors for the kids. That, is serious talent.

 http://rebuildinggenerations.com/


read the online magazine they made about the car, and the group of people that made it happen, at http://rebuildinggenerations.com/sema-show-2016-magazine/

If you have a little time to be amazed, read through their Facebook page. https://www.facebook.com/RebuildingGenerations

or check out their You Tube page and videos: https://www.youtube.com/channel/UCpm_9EHacZE6SLUTFXRamaA

one of the coolest stories from SEMA was this 1970 Toyota FJ40 Land Cruiser from the Garage Shop in Catawba going off pavement from North Carolina to Las Vegas to be in the Racing Junk booth








Friday, November 18, 2016

Horse carriage stored Duesenburg was stuck in the "barn" for 54 years


Phil Cade bought it in 1941 for $450, it was his wife's daily driver, then he took it racing, then put in a locked three-story brick carriage house in 1950.

The brick building was a true time capsule, the names of horses are above the stalls from the time when the building was home to horses, the walls of the carriage house are lined with racing posters from the 1940s,

Phil had started rebuilding the engine in the 1950s, but some time in the early ’60s, he lost interest in the project and left the straight-eight next to the car in pieces.

The paint on the Derham convertible sedan body had been stripped in the 1940s, exposing its aluminum construction, though the fenders retained their aged maroon color.

Mr. Cade took it racing at Watkins Glen after the family moved to Boston. He stripped the black paint off the Derham convertible sedan’s aluminum body, removed the fenders and top, and painted the number 10 on the car’s side. In Shappy’s opinion, “the car didn’t look like a race car at all.” However, in 1949, the car placed 28th in the annual race at Watkins Glen.


http://www.classiccars.ws/duesn2.htm