this is the EMF 30 used for the AAA pathfinding of Detroit to Denver in 1909 https://justacarguy.blogspot.com/2018/05/they-used-emf-30-for-aaas-pathfinding.html
https://www.facebook.com/groups/197491484165115/permalink/323631654884430/
Saturday, October 20, 2018
Gentlemen! There's no point in going in there, turn it around and head back to the last place we went through, I bet it has a good bar!
this is the EMF 30 used for the AAA pathfinding of Detroit to Denver in 1909 https://justacarguy.blogspot.com/2018/05/they-used-emf-30-for-aaas-pathfinding.html
https://www.facebook.com/groups/197491484165115/permalink/323631654884430/
street repair... a bit of info
San Diego has 3000 miles of road.
It contracts out pothole repair.
That company uses a Prius with a laser measuring system to scan the roads for problems.
23 million dollars is what the gas tax means to San Diego, and if Measure 6 passes then the gas tax gets repealed, and that goes away. Just FYI. I'm all for getting the damn roads to be as sooth as those in Las Vegas
https://www.sandiego.gov/street-div/services/roadways
It contracts out pothole repair.
That company uses a Prius with a laser measuring system to scan the roads for problems.
23 million dollars is what the gas tax means to San Diego, and if Measure 6 passes then the gas tax gets repealed, and that goes away. Just FYI. I'm all for getting the damn roads to be as sooth as those in Las Vegas
https://www.sandiego.gov/street-div/services/roadways
Moving out to deliver Ford Ferguson 9Ns... Ferguson supplied the revolutionary draft-control three-point hitch that he devised while Ford built a tractor to attach it to
The "Ferguson System" used a three-point implement-mounting arrangement with hydraulic lift and draft control that would eventually become an industry standard. Ferguson's three-point mounting setup used two solid lower links that did the pulling/carrying and a single top compression link with a control spring that exerted a downward force on the tractor. The action of the upper compression link helped to keep traction on the tractor's rear wheels and, by compressing and releasing the control spring, the link activated the hydraulic system, providing automatic depth control. Also, if the implement encountered an immovable obstacle such as a root or a rock, all hydraulic pressure was relieved and the tractor's rear wheels would begin to spin. This was a huge step forward in terms of operator safety, as it prevented the tractor's front wheels from lifting off the ground unexpectedly, potentially turning the machine over.
The tractor's overall dimensions should permit 14 of them to be loaded in a railroad box car for efficient shipping, Ford advised his engineers, and parts had to be drawn from existing Ford vehicles--this would keep production costs low and make servicing the tractors easy and inexpensive.
http://forums.aaca.org/topic/207364-vintage-delivery-trucks-on-main-street-usa-a-pictorial/?page=32
https://www.hemmings.com/magazine/hmn/2013/04/1939--49-Ford-Ferguson-9N/3724431.html
Herman got help from Lily with the chopper engine!
Ha! Well, it turns out it's photoshopped, but, I still dig it!
here's the original, and it sure makes me believe that this image is just begging for some cool carbs, intakes, blowers, hemi heads, etc to be photoshopped in
from those wonderfull goofballs at Stiffspeed
https://www.facebook.com/groups/stiffspeed/permalink/1575187005961243/
at this weekend's Big Sandy Machine Gun Weekend, there is all kids of cool WW2 stuff with guns, even a ball turret with twin 50s!
50m cal is 4 dollars a round. Other ammo is 35 dollars a magazine
https://www.facebook.com/bigsandyshoot/ in Northwestern Arizona
https://www.bombercamp.org/
Subscribe to:
Posts (Atom)