Showing posts with label Holman Moody. Show all posts
Showing posts with label Holman Moody. Show all posts

Thursday, May 29, 2025

a new to me story about how they cheated back in the day

When Holman Moody went to a displacement/weight formula around 69, a 396 engine could run in a lighter car.

So the clever men at HM found you could fool the P&G displacement checker by drilling a metered hole through the lower exhaust manifold bolt hole to the combustion chamber, then drill the end of the bolt about 3/4 of the way, and drilling another bleed hole in it.

On the way to tech before or after a race, someone would loosen the lower bolts up a little, and just the right amount of air would show the 427 to be a 396. They were very good at this, since all bearings were measured installed with an air gauge

Friday, April 25, 2025

Dan Gurney won the first Motor Trend 500 in this Galaxie 500, owned and crewed by the Wood Brothers and prepped by Holman and Moody



I am looking forward to putting racing numbers on my ol Dodge someday, and have been looking at race car door numbers for years to get a design to emulate. This might be it
 

Wow, I've never seen this decal before, I LIKE it! 

https://public.fotki.com/gwadagone/sixties-nascar--dec/2821.html#media

Wednesday, March 13, 2024

Thanks to George for tipping me off to Ron Fournier models of Kurtis Kraft Indy cars and midgets


Ron Fournier's career as a metal fabricator spans 40 years and across the custom automotive, motorcycle & aircraft industries.

His career began with Holman and Moody in 1964, and since that time racing greats such as Roger Penske, A.J. Foyt, Kar Kraft and Bob Sharp Racing have all utilized Ron's unique skills to transform metal into various components for their championship-winning race cars. General Motors, Ford and Chrysler have also contracted for his fabrication and training services.

In the 1970s, Ron founded Race Craft, which developed a reputation as one of the finest metal fabrication shops in the U.S. Ron and his wife, Sue, have written two books now considered essential references in the automotive metal work field: Metal Fabricator's Handbook and Sheet Metal Handbook.

In the 1990s he wasa making the midgets, in quantities of 250, each numbered.

Thursday, September 21, 2023

Holman Moody made a Falcon with a shorter profile than a Porsche 356 of the day.


Holman Moody was no stranger to Ford, modifying T-Birds and Galaxies on the track. So, Ford approached H/M to build a fire-breathing monster from their new, little compact Falcon Challenger III.

To make the family car a little more slippery in the wind, they removed 3 inches horizontally from the center section of the body, and chopping the roof top another 3 inches, the small Falcon was a full 6 inches shorter than the factory Falcon. Adding the aluminum fastback to the car was the final piece to make the boxy compact slice through the air. 

 The Challenger III had a shorter profile than a Porsche 356 of the day.




Saturday, February 06, 2021

act now to sell some diamond mines, left arms, or kidneys so you can buy this incredible 1967 Mustang modified by Holman & Moody into an “FIA Spec” road racer... at a cost of 24k in 1972 dollars


I didn't know that Ford built Mustangs in Peru. Did you? 
Sure it makes sense, save on shipping cars to South America, but this is the first I've heard of it, unless I've forgotten it.

So this car was owned by the wife of a car racer, who was the son of a car racer... and she'd been driving it for 4 years when her husband decided to send it to North Carolina, in crates, so that Holman & Moody would make it a full crazy race car. 

It was then that the military dictatorship running Peru became a problem to be avoided. As it was when trying to ship the car back to Peru after it was upgraded and tested at Road Alanta




upgrades included a full period TA-spec rear clip mated to a period NASCAR super speedway front clip, Holman-Moody Talladega Super Speedway front suspension with 3.5 inch wide drum brakes and dual shocks, Bud Moore Nascar heads, and whatever else H&M could throw at it.

 Toughness and reliability were paramount, as evidenced by multiple shocks on each corner, easy-to-service four-wheel drum brakes, supremely heavy-duty bits like double-center wheels, and stout coolers for the gearbox and differential.



When the car was completed, Galjuf flew to Road Atlanta for a shakedown test with the H&M crew (bill was even held onto...!)

Once the Mustang was shipped back to Peru and reassembled, Galjuf raced it extensively and successfully for a few years in Peru, Mexico, and Argentina

All of this came to an end, however, when his friend was killed in a similar car. He parked it, then sold it to another racer, after that, it was in the Museo Del Automovil Colección Nicolini in Lima Peru, the biggest car museum in South America and where 97% of the cars were obtained in Peru, which also has a workshop and restoration dept, a staff of 10, and one detailer that services 3 cars a day, so ech car is detailed once every 6 weeks